Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 84 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 75
helps to get better response time and performance.
Antenna Number: The setting allows you configure One for 1T1R SISO or Two for 2T2R MIMO.
The default value is Two. While you change it to one, please connect the antenna to the first
antenna of the radio, for example the Antenna 1-1 or 2-1.
Roaming: This is the setting to enable Client Based Fast Roaming . The Client Based Fast
Roaming is a non-AP controller type fast roaming, it helps the wireless client (must Korenix
Wireless Client) find the new AP with 100ms roaming time.
While the signal value in A = Roaming Threshold, the AP starts Fast Roaming Mechanism.
While the signal difference in B is higher than the roaming difference, the new AP will be
selected.
After the roaming is enabled, some of the new setting will appear in below and you must enter the
value.
Roaming: You can enable or disable the Fast Roaming feature here.
Roaming Threshold(dbm): While
there are some Fast Roaming APs, the
roaming threshold means when the
client will start switch to new AP from
the connected AP.
Roaming Min Diff: In multiple APs overlapping area, the “Roaming Min Diff” is a value similar
to the delay time. Only while the signal strength difference between the connected AP and New