Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 114 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 105
key is used when the authentication method set to RSA key in the configuration (below).
Current Public Key: The content of the current public key is displayed.
Use the Enable IPsec Connection check box to enable or disable the IPSec function. Configure the
appropriate fields below.
Interfaces for IPsec to Use: Select the interface that you want to use communicate with the VPN peer.
Authentication Method: Select the authentication method, RSA key or Shared secret.
Shared secret: Use a static shared secret key. The maximum length is 25.
RSA key: Use an RSA digital signature authentication. The public key for RSA authentication can be
generated on the top-half of this page.
ESP Algorithm: Select the algorithm (AES, DES, or 3DES) to encrypt an ESP (Encapsulating Security
Payload) payload.
Left - IP of network interface: Left corresponds to the right in an IPsec point-to-point connection. The
left and right IP settings should be the same in both IPsec endpoints. Enter the interface IP address of
the left endpoint that can directly connect to the right endpoint. For example, a WAN port IP address or
cellular IP address.
Left Source IP Address: As Left - IP of network interface, enter the LAN port interface IP address of
the left endpoint.
Left Subnet (network/netmask): Enter the subnet mask of the left endpoint in CIDR notation, for
example, 192.168.10.0/24.
Left RSA Key: The attribute is only required when using the RSA key authentication method using the
public key which was generated from the top-half of this page.
Right - IP of network interface: Right corresponds to the left in an IPsec point-to-point connection.
The right IP settings should be the same in both IPsec endpoints. Enter the interface IP address of the
right endpoint that can directly connected to the left endpoint. For example, a WAN port IP address or
cellular IP address.
Right Source IP Address: As Right - IP of network interface, enter the LAN port interface IP address
of the right endpoint.
Right Subnet (network/netmask): Enter the subnet mask of the right endpoint in CIDR notation, for
example, 192.168.20.0/24.
Right RSA Key: The attribute is only required when using the RSA key authentication method using