Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 90 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 81
the same time.
You can change the settings to WAN First. WAN first means the LTE feature is only activated
when the Ethernet WAN port link down or failure.
Auto IP Report:
Most of the ISP assigns the dynamic IP address to the LTE clients and change the IP address
every period of time. While you need to remotely control the gateway, you may need additional
information generated from the remote LTE client device. The Auto IP Report in JetWave 3420 can
meet your need while you need to know the IP address from the product.
Enable Auto IP Report: Press Enable Auto IP Report, the system will automatically update the
system information to remote server/URL.
IP Report to URL: Type the correct URL here for your Gateway report to. You can build your own
server, rent URL address from ISP or Google Cloud service also supports this functionality. Please
check with your ISP or create through Google cloud.
Press “Apply” to activate the new setting.
4.3.3
SIM Security
This page allows you to assign the SIM security. If you (or ISP) already apply the PIN number to
your SIM card, you need to configure the correct PIN number for your AP/Gateway.
After correctly enter the PID number, you can start the LTE connection or change the new PIN
settings.