Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 71 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 62
4.3
Wireless
The “ Wireless ” feature set pages allow users to configure the Wireless LAN configuration. The
Wireless means the WIFI radio of the device.
JetWave 3220 supports dual WIFI radios, you must configure Wireless 1 and Wireless 2 .
JetWave 3420 support one WIFI and one 4G radio, you must configure WIFI features here and go
to 3G/4G LTE page to configure other settings.
There are several settings such as the Basic Settings , Security Setting , Advanced Setting and
Access Control can be configured in the Wireless Configuration.
The figure below shows the Web GUI of the JetWave 3420. The Wireless and 4G settings are
separated to different feature set.
4.2.1
Wireless Basic Setting (JetWave 3220v3)
Use this page to configure the parameters for Wireless LAN Interface of the device. Here you may
change wireless interface modes and related parameters.
Disable Wireless LAN Interface: Check this option to disable WLAN interface, then the wireless
module of the AP will stop working and no wireless device can connect to it.