Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 65 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 56
will queue the transmit data before time interval expired. The time unit is millisecond.
Service mode: You can select TCP Server, TCP Client, and UDP listening.
Serial to Ethernet/ Ethernet to Serial Delimiter: Configure the Delimiter and Flush time (a
timeout that the delimiter not matched) setting for Serial to Ethernet or Ethernet to Serial
transmission. There are up to 4 delimiters can be configured here. After the Delimiter is configured,
the data will be stored in the buffer until hit the Delimiter or the Flush time timeout.
Press “ Apply ” to activate the settings.
4.2.7
Traffic Shaping
Use this page to specify the incoming and outgoing traffic limit.
Enable Traffic Shaping: Select the “ Enable Traffic Shaping ” to activate the feature. After
enabled it, you can continue configure the “ Incoming Traffic Limit ”, “ Incoming Traffic Burst ”,
“ Outgoing Traffic Limit ” and “ Outgoing Traffic Burst ” with K bits per second.
Press “ Apply ” to activate the settings.
4.2.8
Outbound Firewall
Use the “ Firewall Settings ” pages to configure the Firewall setting. There are different types
firewall settings, you can enable the setting, configure the rules, check the table you configured
and Delete Select/All rules.
“ Src IP Filtering ”: Source IP addresses Filtering from your LAN to WAN through the gateway.
“ Dest IP Filtering ”: Destination IP addresses Filtering from the LAN to WAN through the gateway.
“ Src Port Filtering ”: Source Ports Filtering from the LAN to WAN through the gateway.