Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 98 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 89
4.5.5
Configuration File
The AP/Gateway provides Configuration File Backup (Save Setting to File), Restore (Load
Setting from File) and Reset Setting to Default features.
With Backup command, you can save current configuration file saved in the AP/Gateway’s flash to
admin PC. This will allow you to go to Restore command later to restore the configuration file back
to the AP/Gateway. Before you restore the configuration file, you must place the backup
configuration file to specific folder in the PC. Users can also browse the target folder and select
existed configuration file. The AP/Gateway can then download this file back to the flash.
This Browse… mode is only provided by Web UI. For CLI, please type specific path of the
configuration file.
Backup (Save Setting to File): Press “Save…” to backup the configuration file to specific
path/folder in your computer.
Restore (Load Setting from File): Type the path of the configuration file or click “ Browse… ” to
browse the firmware file. The Browse feature is only supported in Web GUI. Press “ Upload ” after
the file is selected.
Reset Settings to Default: Press “Reset” can reset all the configurations, but not included default
IP address to default settings. If you want to reset the IP address to default value, select “Include
IP Settings”.