Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 21 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 12
2.3
I/O Configuration
2.3.1
Wiring your Ethernet Port
There are two Gigabit Ethernet ports. The 2 ports are standard RJ-45 form factor. They can
support 10Base-TX, 100Base-TX and 1000Base-T. The 10/100Base-TX also support both full or
half duplex mode. All the Ethernet ports will auto-detect the signal from connected devices to
negotiate the link speed and duplex mode. Auto MDI/MDIX allows users to connect another
switch, hub or workstation without changing straight through or crossover cables. In some cases,
the MDI/MDI-X may requests the connected device support auto-negotiation.
Eth 1: The Eth 1 is also an IEEE 802.3at compliant PoE – Power Device (PD) port. It can accept
both power and data transmission from the PSE or PoE injector. Please refer to the 2.2.2
Powered by PoE for PoE installation.
Eth 2: The Eth 2 is an standard 10/100/1000Base-T RJ-45 port. It can transmit data only.
Available Cable Type: (Refer to the appendix for M12 to RJ-45 cable assembly)
10Base
‐
T: 2
‐
pair UTP/STP Cat. 3, 4, 5 cable (100m)
100 Base
‐
TX: 2/4
‐
pair UTP/STP Cat. 5 cable (100m)
1000 Base
‐
T: 4
‐
pair UTP/STP Cat. 5 cable (100m)
PoE Cable Request: CAT 5E/CAT 6 is preferred for PoE power + Data transmission.
Wiring STP Cable: STP (Shielded Twisted Pair) cable is preferred. The device is an
EN50121-4 certificated product and usually install in harsh environment, part of the EMS
protection are based on STP cable, for example the Surge protection of front Ethernet ports. STP
cable can provide better field protection. It is MUST for the device installation in harsh
environment.
2.3.2
Reset
There is one Reset button located on the front of the device. This is design for user to reboot the
system port or force reset the configuration to default. The function is depended on how much
time you press the button.
Press 3 seconds to reboot the device.
Press more than 7 seconds can reset the configuration to default.