Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 87 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 78
4.3
4G/Cellular
The “ 4G/Cellular ” feature set pages allow users to see the 4G/LTE Status, configure the Basic
LTE Setting, SIM Security and download the Debug message. The 4G means the 2 nd radio of the
JetWave 3420 device.
4.3.1
Status
This page shows the current status and some basic settings of the device.
After the 4G/LTE connected, some of the information will be updated per your ISP (Internet Service
Provider).
Provider: The name of the ISP.
APN: The APN (Access Point Name) name provided by your ISP.
Note that some of the ISP asks specific APN name, you have to configure in Basic Settings first,
please refer to the instruction in next page.
Service Type: After LTE connected, the connected ISP will update the service type here. The
possible types are GSM, UMTS, GSM w/EGPRS, UMTS w/HSDPA, UMTS w/HSDPA and HSUPA,
E-UTRAN, Unknown, No Service(default value)
(Note: The cellular service is mainly applied for HSPA/LTE data communication. The rest of
services are backward compatible service to avoid lost while HSPA/LTE is not available.)
IMEI: This item shows the International Mobile Equipment Identity (IMEI) of the LTE module.
Signal Strength: The signal strength to the remote connected base station. If the signal strength
shows low, please change the AP/Gateway location or mounting the antenna in better location.
Below are the signal strength definitions in our system:
0 dBm (Default value while no connection, or Read the Signal Strength error.)