Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 85 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 76
AP is lower than the value, the AP will be switched.
Scan Channels: .This is the setting to configure what is the target scan channels.
Ping Watchdog: Under Wireless Client mode, the item support to create a ping connection with
the specific ip address. If the connection lost. The system will restart wifi client to try restore the
connection.
IP Address: The specific ip address for ping watchdog.
Failure CountThe Clinet will be restarted if the ping packets lost over the count
Mac Clone: Under Wireless Client or JSM-Client mode, this feature allows the client to clone and
use the MAC address of the device connected to the LAN. Auto:Client will collect the mac address
from LAN packets to replace wireless mac address. Static:Client shares the assigned MAC
address with multiple devices connected to the LAN. This allows for multiple devices to connect to
the AP via the LAN and only one of them needs to be assigned a MAC address.
Mac Clone Static Address:Specifies the static wireless MAC address for the device.
AP Roaming: Under AP mode, AP will kick out the wireless clients if the RSSI of client is lower
than setting of AP Roaming Threshold.
AP Roaming Threshold: The RSSI value of AP Roaming. The default value is -80(dbm).
AP Roaming Time: The cycle scan time of AP Roaming. Enter a value between 1 and 30. The
default value is 5(sec).
Roaming: Under Client mode, STA will roaming to better AP if the RSSI of client is lower than
setting of Roaming Threshold.
Roaming Threshold: The RSSI value of roaming. The default value is -80(dbm).