Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 45 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 36
It is Important to change all the default settings of the Wireless AP, includes the User
Name, Password, Default IP Address, Default SSID, SNMP Community Name and
configure Wireless Security to secure your network.
3.2
System Requirements
Before configuration, please make sure your system meets the following requirements:
A computer coupled with 10/100/1000 Base-T(X) adapter;
Configure the computer with a static IP address of 192.168.10.x (X cannot be 0, 1, nor 255), as the
default IP address of JetWave 3200/3400 Series is 192.168.10.1 (Eth 2 of JetWave 3420).
A Web browser on PC for configuration such as Microsoft Internet Explorer 6.0 or above, Google
Chrome or Firefox.
Note: If you want to do throughput test, not just configure the switch, please notice that the
throughput of the high performance and low performance CPU must be different.
3.3
How to Login the Web-based Interface
The system provides you with user-friendly Web-based management tool.
Open Web browser and enter the IP address (Default: 192.168.10.1 ) into the address field. You will see
the WELCOME page as below.
Figure – Web GUI Login Page
Enter the name of Account (Default: admin ) and password (Default: admin ) respectively and click
“ Login ” to login the main page of the device. As you can see, this management interface provides main
options in the above, which are Status , System , Wireless , Management , Tools , Device Front Panel,
Save, Reboot and Logout .