Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 47 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 38
3-pin Diagnostic Console:
There is one 3-pin Diagnostic console for out of band management. If you want to access the AP
through the console, please assembly the console cable or purchase from our sales first.
Please attach RS-232 DB-9 connector to your PC COM port, connect another end to the 3-pin socket
Console port located in the bottom side.
1. Go to Start -> Program -> Accessories -> Communication -> Hyper Terminal
2. Give a name to the new console connection.
3. Choose the COM name
4. Select correct serial settings. The serial settings of JetWave 3220v3/3420v3 series are as below:
Baud Rate: 115,200 /
Parity: None /
Data Bit: 8 /
Stop Bit: 1
5. After connected, you can see Switch login request.
6. Login the switch. The default username is “admin”, password, “admin”.
Telnet/SSH:
You can connect to the device by Telnet and the command lines are the same as what you see by
RS232 console port. Below are the steps to open Telnet connection to the switch.
1. Go to Start -> Run -> cmd. And then press Enter
2. Type the Telnet 192.168.10.1 (or the IP address of the switch). And then press Enter
Note that the Telnet.exe file is not provided after Window 7. You can download it from Microsoft web
site. Or you can use 3 rd Party tool, for example the Putty.
3
rd
Party tool:
Download PuTTY: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
The copyright of PuTTY is belonged to Putty. We don’t have any contract with them. Please follow the
shareware policy of their company.
1.
Open SSH Client/PuTTY In the Session configuration, enter the Host Name (IP Address of your
device) and Port number (default = 22).