Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 112 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 103
This page allows user to configure Port Forwarding rules on the OpenVPN Client tunnel.
Enable VPN Port Forwarding: Select Enable VPN Port Forwarding and then enter the parameters to
create the port forwarding entries.
Protocol: Configure the protocol type: TCP, UDP or Both (TCP and UDP).
Source IP Address: Enter the specific incoming packet's source IP address for the VPN interface. This
field can be left empty.
Destination Port or Range: Enter the specific incoming packet's destination port range for the VPN
interface.
Forwarding IP Address: Enter the specific forwarding IP address of the LAN device.
Forwarding Port or Range: Configure the port or the range of ports for the device in the LAN.
Click the Apply button to apply the configuration changes.
Click the Delete Selected button to delete selected entries.
Click the Delete All button to delete all entries.
Click the Refresh button to refresh the port forwarding entries.