Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 64 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 55
Link Failure: You can bind the Ethernet port failure event with Relay output. Select the Port 1, 2
or 1+2 as the power failure event.
Press “ Apply ” to activate the settings.
4.2.6
Serial Settings
Use this page to configure the Serial Settings . The JetWave 3420 series is equipped with one
RS-232/422/485 3-in-1 Serial port. It supports TCP Server/Client and UDP for remote connection.
This page allows you to configure the Serial interface’s parameters.
Basic Settings: This page allows you configure basic settings of the Serial port.
Serial port Settings: You can select the “ Baudrate ”, “ Parity ”, “ Databit ”, “ Stopbit ” and “ Flow
control ” settings from the dropdown list.
Interface: Manually choose and change the interface type. The serial port supports the RS232,
RS422, RS485-2w, RS485-4w, you can select either
one from the dropdown list.
Tx Interval: Configure the Tx Interval time, the system