Step 1
Unplug all of the existing
Phone
Cords
from their current
Phone Jacks
.
Step 2
Plug a
Phone Filter
into every
Phone Jack
in your home.
Note:
DO NOT plug a Phone Filter into the Jack on the wall near your computer.
Step 3
Plug the loose end of the existing
Phone Cord
into a
Phone Filter
and
keep the other end connected to the
Phone (or fax machine, caller ID, or
answering machine) itself.
If you want to have a Phone next to your Computer:
Step 4
Find the
Phone Cord
that is
connected to the
Telephone
next to
your Computer. Unplug this Phone Cord
from the Phone Jack that it is currently
plugged into. Keep the other end
connected to the Telephone itself.
Note:
DO NOT unplug the DSL Cable from the Phone Jack near your computer.
Phone
Jack
Phone
Cord
Note:
DO NOT unplug the DSL Cable from the Phone Jack near your computer.
These instructions will change based on your location.
If you are located in the United States, please go to the "U.S.
Customers ONLY" section.
If you are NOT located in the United States, please go to the
"Non-U.S. Customers ONLY" section.
Note:
If the Internet light continues to blink, confirm that you have received
notification from your DSL Provider that your DSL service is ON. Otherwise,
contact your DSL Provider immediately.
1
Connect the DSL Gateway
2
Connect the Filters
Step 1
Get your
DSL Gateway
from
your DSL Quick Start Kit and take it out
of the bag.
Step 4
Plug the larger end of the
Power
Cord
into a
Power Outlet
.
Step 5
Confirm that the
Power light
on the DSL Gateway is
GREEN
. This
may take a few moments.
Step 10
Now get the black
DSL Cable
.
Step 10
Plug one end of the
DSL Cable
into the
GREEN Port
, labeled “Line”,which
is located on the back of the DSL
Gateway.
Step 11
Plug the other end of the
DSL
Cable
into the
Phone Jack
closest to
your computer.
Step 12
Confirm that the
Internet light
on the DSL Gateway is SOLID
GREEN
.
(This may take up to 30 seconds.)
Step 9
Confirm that the
Power
and one
of the
Ethernet Network
lights on the
Cable/DSL Router are SOLID
GREEN
.
(This may take a few moments and the
Gateway light may flash.)
U.S Customers ONLY
Phone Filters are connected to all of the Phone Jacks in your
home to allow you to talk on the phone and be online at the
same time. Every phone in your home with the same phone
number as your DSL line will need a Phone Filter.
Get the CLEAR Bag and take out the Phone Filters.
Step 2
Get the
BLACK bag
and remove
the
Power Cord
and black
DSL Cable
from the bag.
Step 3
Plug the smaller end of the
Power Cord
into the
Black Port
located
on the back of the DSL Gateway.
This port is circular and marked “Power”.
Note:
The number and type of Phone Filters included in this kit may vary. It is
dependent on your Internet Service Provider.
Home Security Alarm Notice
If you have a monitored home security alarm,
please contact your Security System Provider to
schedule a visit to your home for installation of a
Phone Filter on the Alarm.
Step 6
Get the
Yellow Cable
from your
DSL Quick Start Kit.
Step 7
Connect one end of the
Yellow
Cable
into the
Yellow Port
on the back
of your DSL Gateway. You will hear a
“click” when the Yellow Cable has been
connected properly.
You can plug the Yellow Cable into any
open Yellow Port.
Step 8
Plug the loose end of the
Yellow
Cable
into the
Ethernet Port
located
on the back of your computer. You will
hear a “click” when the Yellow Cable has
been connected properly.
The Ethernet Port looks similar to a regular
Phone Jack but is slightly larger.
Please flip this Guide over now.
Stock# 0530-0405-000
Note:
The pictures included in this Section are for the 4-port DSL Gateway.,If you have
a DSL Gateway with 1 Yellow Port,some of the pictures may not match your installation.
