Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 44 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 35
Subnet Mask 255.255.255.0
Gateway 0.0.0.0
Primary DNS Server 0.0.0.0
Secondary DNS Server 0.0.0.0
IP Setup
– Eth 2 (LAN)
IP Address 192.168.10.1
Subnet Mask 255.255.255.0
DHCP Server Enabled
DHCP IP Range Start 192.168.10.101
DHCP IP Range End 192.168.10.150
DHCP Subnet Mask 255.255.255.0
DHCP Gateway 192.168.10.1
(Refer to the System
– IP Setting for further info.)
Wireless Basic
Setting
Wireless Mode AP
Wireless Network Name
(SSID)
JetWave3000_1 (WIFI 1)
JetWave3000_2 (WIFI 2)
Broadcast SSID Enabled
802.11 Mode 802.11G/N
Data Rate Auto
(Refer to the Wireless
– WLAN Settings – Basic Settings)
Remote Settings
Remote Management
Privacy
Telnet, SNMP, SNMP Trap, Email Alert
Even Warning Type
WLAN association, Authentication fail,
Configuration Changed
SNMP
Version 2
Server Port: 161
Get Community Public
Set Community Private
Trap Destination 0.0.0.0
Trap Community Public
Korenix View Utility
Device Search, IP Assign,
Basic Tool, Wireless Panel
Note: While using Korenix View Utility to
search the device, please connect to the
Eth 2 (LAN).
Diagnostic CLI
Console Type
3-pin (Tx, Rx, GND)
Refer to the appendix B, RS232 to 3-pin pin
assignment.
Baud Rate 115,200
Parameter N, 8, 1
Warning: