background image

 

Version 1. April 2017 

SmartZone Gateway EPA126 Troubleshooting Guide 

 

 

 

Contents 

PDUs .............................................................................................................................................................. 2 

Sensors .......................................................................................................................................................... 5 

SmartZone DCIM not receiving Traps ........................................................................................................... 6 

Temperature sensor reporting an alarm ...................................................................................................... 7 

Ping works but cannot get into web-interface ............................................................................................. 8 

Gateway EPA126 Reset ................................................................................................................................. 8 

Cannot ping the Gateway EPA126 .............................................................................................................. 10 

Gateway EPA126 displaying an alarm 

 Red Alarm LED on ........................................................................ 10 

Gateway EPA126 unit has been reset? ....................................................................................................... 10 

Connectivity between Gateway EPA126 and PDU lost ............................................................................... 11 

How to audit Gateway EPA126 activities and changes ............................................................................... 11 

Power A and/or B Feed on Gateway EPA126 are disconnected/powered down ....................................... 11 

When power goes down in the cabinet, how to get access inside the cabinet ......................................... 12 

Panduit Technical Support for SmartZone Gateway EPA126 ..................................................................... 12 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for SmartZone EPA126














Reviews: