Bay Alarm Vista-20Bay, Installation And Setup Manual

Page: 72 / 138

VISTA-20BAY Installation & Setup Guide
16–4
✱
38 CONFIRMATION OF ARMING DING
0
0 = no ding
1 = confirmation ding after arming system
2 = confirmation ding after arming from RF button or RF keypad only (ding
occurs when the system receives the RF transmission)
Confirmation of arming is -second external sounder “ding” when closing
report is sent, or at the end of Exit Delay.
✱
39 POWER UP IN PREVIOUS STATE 1
0 = always power up in a disarmed state
1 = assume the system status prior to power-down
When the system powers up armed, an alarm will occur 1 minute after
arming if a zone is faulted.
Note that if the previous state was armed STAY, INSTANT, AWAY, or
MAXIMUM, the system will not respond to sensor changes for 1 minute,
which allows time for sensors such as PIRs to stabilize.
UL installations: Must be 1 (power up in previous state)
DIALER
PROGRAMMING
(
✱
40-
✱
50)
✱
40 PABX ACCESS CODE (See Box at Left)
| | | | |
Enter up to 6 digits if PABX is needed to access an outside line. If fewer than
6 digits need to be entered, exit by pressing [
✱
] and next field number (for
example, 41). To clear entries from field, press
✱
40
✱
.
✱
41 PRIMARY PHONE NO. (See Box at Left)
| | | | | | | | | | | | | | | | | | |
Enter up to 20 digits. If you enter fewer than 20 digits, exit by pressing
[
✱
] and next field number (for example, 42). To clear entries from field, press
✱
41
✱
.
NOTE:
Backup reporting (in which 8 calls are made to the secondary
phone number if no kissoff is received after 8 attempts to the primary
number) is automatic only if there is a secondary phone number (field
✱
42).
Fields
✱
40,
✱
41,
✱
42:
Enter up to the number
of digits shown. Do not
fill unused spaces.
Enter 0–9,
# + 11 for
✱
# + 12 for #
# + 13 for a pause
(2 seconds)
✱
42 SECONDARY PHONE NO. (See Box at Left)
| | | | | | | | | | | | | | | | | | |
Enter up to 20 digits. If you enter fewer than 20 digits, exit by pressing
[
✱
] and next field number (for example, 43). To clear entries from field, press
✱
42
✱
. See backup reporting Note for field *41. If you are using the pager
feature, enter the pager phone number here.