Bay Alarm Vista-20Bay, Installation And Setup Manual

Page: 52 / 138

VISTA-20BAY Installation & Setup Guide
10–2
Dynamic Signaling Feature
This VISTA-20BAY control panel features Dynamic Signaling Delay (DSD) and Dynamic
Signaling Priority (DSP) message reporting when Long Range Radio is used. These
message outputs are accessed through data fields ✱ 54 and ✱ 55. The Dynamic Signaling
feature is designed to reduce the number of redundant reports sent to the Central Station.
The features are described as follows:
•
Dynamic Signaling Delay (DSD)
You can select the time the panel should wait for acknowledgment from the first
reporting destination before it attempts to send a message to the second destination.
Delays can be selected from 0 to 225 seconds, in 15-second increments. This choice is
made by the entry in field
✱
54. This delay is applicable to each individual message.
•
Dynamic Signaling Priority (DSP)
You can select the initial reporting destination for messages, Primary Dialer, or Long
Range Radio. This choice is made by the entry in field
✱ 55.
The chart below provides a concise explanation of how the Dynamic signaling feature
functions.
If Priority (
✱
55) is… And message is… Then…
acknowledged before delay
expires, message is removed from queue and
no message is sent to LRR. Primary Phone No.
("0" entered),
not acknowledged before delay
expires, message is sent to both the Primary
Phone No. and LRR.
acknowledged before delay
expires, message is removed from queue and
no message is sent to Primary
Phone No. Long Range Radio
("1" entered),
not acknowledged before delay
expires, message is sent to both the Primary
Phone No. and LRR.
You must enable field ✱ 29, OUTPUT TO LONG RANGE RADIO, if this feature is to function.