Bay Alarm Vista-20Bay, Installation And Setup Manual

Page: 57 / 138

12–1
S E C T I O N 1 2
Audio Alarm Verification (AAV) Unit
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
♦
General Information
♦
Wiring Connections
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
General Information
An Audio Alarm Verification (AAV) module, such as the Eagle 1241, is an add-on accessory
that permits voice dialog between an operator at a Central Station and a person at the alarm
installation, for the purpose of alarm verification.
To enable the AAV feature, enter option “4” in field
✱
91
Option Selection, Select Contact ID report
format for the primary phone number, and program alarm reports for the primary phone number.
UL
The AAV option cannot be used in UL installations.
After all messages have been sent during a reporting session to the primary phone number,
the control triggers the AAV if at least one of the messages was an alarm report. The control
sends a “listen-in to follow” message (Contact ID event code 606), which signals the 685 to
hold the phone connection for 1 minute.
Once the digital message is “kissed off,” the control gives up the phone line to the AAV
module, without breaking connection with the Central Station. At this time, all sirens and all
continuous keypad sounds are shut off.
You must connect a 4204 or 4229 Relay Module when using an AAV unit. Do not use relay output
number 1 for any other function.
Wiring Connections
The method used to trigger AAV is via the use of a 4204 or 4229 relay module, as shown in
the AAV connection diagrams that follow (one diagram for connections when a 4285/4286
VIP Module is used, the other when the 4285/4286 VIP Module is not used).