Bay Alarm Vista-20Bay, Installation And Setup Manual

Page: 102 / 138

VISTA-20BAY Installation & Setup Guide
20–2
P r o g r a m A l p h a ?
0 = N o , 1 = Y e s
0 0
2. Press
✱
82.
The Program Alpha ? prompt appears.
C u s t o m W o r d s ?
0 = N o , 1 = Y e s
0 0
3. Press 1 (Yes).
The Custom Words ? prompt appears.
4. Press 0 (No).* The system then automatically displays the
descriptor for zone 1.
* The procedure for adding custom words/numbers to the built-in
vocabulary is given in “Adding Custom Words” on the next page.
Summary Mode Display
Default Descriptor
È
✳
Z N 0 1 Z O N E 0 1
If a descriptor was not entered previously for zone 1, the default
descriptor for zone 1 is displayed.
Note that this is a “summary mode,” and that no entries can be
made. Entries can be made only when the display contains a
flashing cursor, which signifies the “entry mode.”
Flashing Cursor (system
is ready for entry of
word).
È
✳
Z N 0 1
5. To delete or change the default descriptor for zone 1,
press [
✱
]
plus the same zone number (01).
This clears that descriptor
and allows changes to be made at the flashing cursor.
NOTE: If you do not wish to change the existing descriptor for
zone 1, enter [
✱
] plus the next zone number for which
you wish to enter (or check) a descriptor. A summary
display for that zone appears. You must then press [
✱
]
plus the same zone number again to gain access to the
entry mode (flashing cursor) for that zone.
Flashing Cursor
È
✳
Z N 0 1 B A C K
6. Press
[#]
plus the
3-digit number
for the first word from the
Alpha Vocabulary List. Example: The descriptor that we wish to
enter for zone 1 is BACK DOOR. From the list, BACK = 013.
Therefore, you would enter
# 0 1 3
.
NOTE: If you accidentally enter the wrong word, simply press
[#] plus the correct 3-digit number for the word you
want.
✳
Z N 0 1 B A C K
Ç
Flashing Cursor if “6” is
pressed
(system is
ready for next word).
7. Press 6 to accept the selected word and continue.
NOTE: If this is the only word you are using for the descriptor,
press
8 instead of 6 to save that word in memory, and
then go to step 11.
✳
Z N 0 1 B A C K
D O O R
Ç
Flashing Cursor
8. Enter the
3-digit number for the next word. In our example, the
word is DOOR, whose number is “057.”
Enter
# 0 5 7 . The display at left appears: