Bay Alarm Vista-20Bay, Installation And Setup Manual

Page: 33 / 138

6–1
S E C T I O N 6
Wireless Expansion (5800 System)
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
♦
About Wireless Expansion
♦
Installing the 5881/5882 Receiver
♦
Installing the 5800TM Module
♦
Jam Detection and Reporting
♦
About 5800 Series Transmitters
♦
Installing 5800 Series Transmitters
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
About Wireless Expansion
In addition to its basic wired zones, the VISTA-20BAY control supports up to 30 wireless
zones using an appropriate 5881 type RF receiver. The actual number of zones supported
depends on whether you are using a wired zone expander module.
For example: If you are using only four of the wired expansion loops, an RF receiver could
add 26 RF zones to the system, using any unused zone numbers 10-39, for a combined total of
30 wired and wireless expansion zones.
The receiver can detect signals from wireless transmitters within a nominal range of 200
feet.
RF Receiver No. of Zones
5881L/5882L up to 8
5881M/5882M up to 16
5881H/5882H up to 30
Receiver Supervision
The receiver is supervised. The following conditions will cause a Trouble report to be
generated and
CHECK and ZONE 09 messages to be displayed:
•
If communication between the panel and the receiver is interrupted.
or
•
If no valid RF signals from at least one supervised wireless transmitter are received
within 12 hours.
House Identification
If you are using a 5804BD, 5827, or 5827BD Wireless Keypad with the system, you must
program a House ID Code (01-31) in field
✱
24 to establish proper communication, and the
keypad must be set to the same ID.
House ID 00 disables all wireless keypads.