manualshive.com logo in svg

Avaya ERS 8600 series, Configuration Manual

The Avaya ERS 8600 series is a high-performance networking solution designed for large enterprises. Get full control over your network with the Configuration Manual, available for free download from manualshive.com. This manual provides detailed instructions on optimizing your network and maximizing performance.

Share
Download
background image

Contents

Chapter 1: New in this release................................................................................................11

Features..........................................................................................................................................................11

IPv6 DHCP Relay...................................................................................................................................11
IPv6 VRRP..............................................................................................................................................11
IPv6 RSMLT...........................................................................................................................................12

Other changes.................................................................................................................................................12

OSPFv3 clarification...............................................................................................................................13
Enterprise Device Manager....................................................................................................................13
References to classic modules removed................................................................................................13

Changes in revision 03.02...............................................................................................................................13

8695 SF/CPU renamed to 8895 SF/CPU...............................................................................................13

Chapter 2: Introduction...........................................................................................................15

Chapter 3: IPv6 routing fundamentals...................................................................................17

The IPv6 header..............................................................................................................................................18

IPv6 addresses.......................................................................................................................................18
Address formats.....................................................................................................................................20
IPv6 extension headers..........................................................................................................................21
Comparison of IPv4 and IPv6.................................................................................................................22

ICMPv6...........................................................................................................................................................22
Neighbor discovery.........................................................................................................................................23

ND messages.........................................................................................................................................24
Neighbor discovery cache......................................................................................................................25
Router discovery.....................................................................................................................................27

IPv6 and the Avaya Ethernet Routing Switch 8800/8600...............................................................................27
Management access.......................................................................................................................................28
Host autoconfiguration....................................................................................................................................29
IPv6 VLANs and brouter ports........................................................................................................................30
Tunneling.........................................................................................................................................................30

Manually configured tunnels...................................................................................................................30

Path MTU discovery........................................................................................................................................31
Routing............................................................................................................................................................31

Virtual routing between VLANs...............................................................................................................32
Brouter ports...........................................................................................................................................32
Static routes............................................................................................................................................33
Open Shortest Path First protocol..........................................................................................................36

OSPFv3...........................................................................................................................................................47

Flooding scope.......................................................................................................................................48
Multiple instances per link......................................................................................................................48
Link-local addresses...............................................................................................................................48
Authentication.........................................................................................................................................49
Packet format.........................................................................................................................................49
R-bit........................................................................................................................................................49
New LSAs...............................................................................................................................................50
Unknown LSA types...............................................................................................................................50
Stub area................................................................................................................................................50

Security...........................................................................................................................................................51

Configuration — IPv6 Routing

November 2010     3

Summary of Contents for ERS 8600 series





































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ERS 8600 series

D-Link DWR-112 Technical Support Setup Procedure preview
DWR-112
Brand: D-Link Pages: 11
D-Link DSR-250 Cli Reference Manual preview
DSR-250
Brand: D-Link Pages: 83
D-Link DSR-150 Reference Manual preview
DSR-150
Brand: D-Link Pages: 129
D-Link DSL-G804V Manual preview
DSL-G804V
Brand: D-Link Pages: 10
D-Link DSL-G804V Quick Information Manual preview
DSL-G804V
Brand: D-Link Pages: 21
D-Link DSL-2750E Quick Start Manual preview
DSL-2750E
Brand: D-Link Pages: 6
D-Link DSL-2750E Technical Support Setup Procedure preview
DSL-2750E
Brand: D-Link Pages: 17
D-Link DSL-2740U Setup Manual preview
DSL-2740U
Brand: D-Link Pages: 4
D-Link DSL-2730B How To Set Up preview
DSL-2730B
Brand: D-Link Pages: 6
D-Link DSL-520T Quick Installation Manual preview
DSL-520T
Brand: D-Link Pages: 86
D-Link DSL-502T Installing Usb Drivers preview
DSL-502T
Brand: D-Link Pages: 3
D-Link DSL-3900 Quick Start Manual preview
DSL-3900
Brand: D-Link Pages: 4
D-Link DWR-921 How To Set Up preview
DWR-921
Brand: D-Link Pages: 4
D-Link DSL-3580L Series Quick Installation Manual preview
DSL-3580L Series
Brand: D-Link Pages: 20
D-Link DSL-3785 Quick Installation Manual preview
DSL-3785
Brand: D-Link Pages: 64
D-Link DSL-224 User Manual preview
DSL-224
Brand: D-Link Pages: 73
Paradyne 7610 Overview preview
7610
Brand: Paradyne Pages: 2
Alcatel Speed Touch 591s Technical User'S Manual preview
Speed Touch 591s
Brand: Alcatel Pages: 184

Brands by name

Popular brands

Load more brands