Avaya ERS 8600 series, Configuration Manual

Page: 407 / 420

Figure 54: show ipv6 mld interface
Neighbor cache
Use the
show ipv6 neighbor
command to view entries in the neighbor cache. The syntax
for this command is as follows.
show ipv6 neighbor [<ipv6addr>] [type {other|dynamic|static|local}]
[interface <interface-type> <interface-id>]
The following table explains the parameters for this command.
Table 50: Command parameters
Parameter Description
interface-id Specifies the interface ID.
interface-type
Specifies the type of interface if you want to
limit the output. The options are fastEthernet,
gigabitEthernet, or vlan.
type Specifies the type of mapping as one of the
following:
• other
• dynamic
• static
• local
Neighbor cache
Configuration — IPv6 Routing November 2010 407