Avaya ERS 8600 series, Configuration Manual

Page: 325 / 420

Variable Value
ip <ip-attributes> Specifies the permitted IP attributes for the ACT
template. The list of allowed attributes must be
separated by commas and includes,
[none | srcIp, dstIp, ipFragFlag, ipOptions,
ipProtoType, dscp].
ipv6 <ipv6-attributes> Specifies the permitted IPv6 for the ACT template. The
list of allowed attributes must be separated by
commas and includes,
[none | srcIpv6, dstIpv6, nextHdr]
name <value> Specifies a name for the ACT. <value> is an optional
parameter that specifies a name for the ACT using 0–
32 characters.
protocol <protocol-attributes> Specifies the permitted protocol attributes for the ACT
template. The list of allowed attributes must be
separated by commas and includes,
[none | tcpSrcPort, udpSrcPort, tcpDstPort,
udpDstPort, tcpFlags, icmpMsgFlags]
Creating a template for user-created patterns
Create a template for patterns within an ACT. You can associate a maximum of three patterns
with an ACT.
Procedure steps
Create a template by using the following command:
config filter act
<act-id>
pattern
<pattern-name>
Variable definitions
Use the data in the following table to use the
config filter act pattern
command.
Variable Value
act-id Specifies an ACT ID in the range of 1–4096.
add
<base> <offset>
<length>
Adds a template for patterns you create. Options include:
Creating a template for user-created patterns
Configuration — IPv6 Routing November 2010 325