Avaya ERS 8600 series, Configuration Manual

Page: 308 / 420

Configuring an ACT
Configure an access control template (ACT) to create, delete, apply, or specify attributes. After
you apply the ACT you cannot change the attributes. ACT IDs 4001 to 4096 are reserved for
system-defined ACTs.
Procedure steps
1. In the navigation tree, open the following folders: Configuration, Security, Data
Path .
2. Double-click Advanced Filters (ACE/ACLs) .
3. Click Insert to add a new ACT.
4. Select the required IPv6 attributes.
5. Click
Insert .
Variable definitions
Use the data in the following table to configure an ACT.
Variable Value
ActId Specifies a unique identifier for the ACT. The
range is 1–4096.
Name Specifies a descriptive user-defined name
for the ACT entry.
ArpAttrs Specifies one of the following ARP attributes:
• none
• operation (This is the only valid option for
ARP attributes.)
Important:
ArpAttrs is not a supported for IPv6 filters.
EthernetAttrs Specifies one or more of the following
Ethernet attributes:
• none
• srcMac
• dstMac
• etherType
IPv6 traffic filter configuration using Enterprise Device Manager
308 Configuration — IPv6 Routing November 2010