Avaya ERS 8600 series, Configuration Manual

Page: 85 / 420

Variable Value
PhysAddress The media-dependent physical address. For Ethernet, this is a MAC
address.
AdminStatus The indication of whether IPv6 is enabled (true) or disabled (false)
on this interface. This object does not affect the state of the interface
itself, only the connection to an IPv6 stack. The default is false.
OperStatus The current operational status of the interface.
ReachableTime The time (in milliseconds) a neighbor is considered reachable after
receiving a reachability confirmation message. The default is 30000.
RetransmitTime The time (in milliseconds) between retransmissions of neighbor
solicitation messages to a neighbor when resolving the address or
when probing the reachability of a neighbor. The default is 1000.
MulticastAdminStatu
s The indication of whether multicasting for IPv6 is enabled (up) or
disabled (down) on this interface. The default is false.
Assigning IPv6 addresses to a brouter port or VLAN
Assign IPv6 addresses to interfaces to configure IPv6 routing for the interface.
Procedure steps
1. In the navigation tree, open the following folders: Configuration, IPv6.
2. Double-click IPv6.
3. Click the Addresses tab.
4. Click
Insert .
5. In the IfIndex box, click Port or VLAN , and select a port number or VLAN.
6. Edit the remaining fields.
7. Click
Insert .
8. Click Apply .
Variable definitions
Use the data in the following table to configure the IPv6 addresses for a brouter port or VLAN.
Variable Value
IfIndex The index value that uniquely identifies the interface to which this entry
applies.
Assigning IPv6 addresses to a brouter port or VLAN
Configuration — IPv6 Routing November 2010 85