Avaya ERS 8600 series, Configuration Manual

Page: 214 / 420

Variable Value
• none does not override the timer
• preemptHoldDownTimer preempts the timer
HoldDownTimer Configures the amount of time (in seconds) to wait before
preempting the current VRRP master.
HoldDownTimeRemainin
g Indicates the amount of time (in seconds) left before the
HoldDownTimer expires.
GlobalIPAddr The global IPv6 address assigned to the virtual router interface.
Configuring additional addresses on the VRRP interface
Use this procedure to specify additional addresses for the VRRP interface to back up.
Procedure steps
1. In the navigation tree, open the following folders: Configuration, IPv6.
2. Double-click VRRP .
3. Click the Interface tab.
4. Select an existing VRRP interface.
5. Click AssociatedIPAddr.
Note that you can also access the AssociatedIPAddr button from the Port VRRP
tab (Configuration > Edit > Port > IPv6 > VRRP) or from the VLAN VRRP tab
(Configuration > VLANs > IPv6 > VRRP)
6. Click Insert.
7. Complete the fields for the associated address.
8. Click Apply .
Variable definitions
Use the data in the following table to configure additional VRRP addresses.
IPv6 VRRP configuration using Enterprise Device Manager
214 Configuration — IPv6 Routing November 2010