Avaya ERS 8600 series, Configuration Manual

Page: 279 / 420

Variable Value
must be at least four times the Hello interval value. The
default is 40.
delete Deletes an OSPF interface.
hello-interval <seconds> Configures the OSPF hello interval for the interface.
seconds is the number of seconds between hello
packets sent on this interface. The range is 1–
65535. The default is 10.
Important:
When you change the hello interval values, you
must save the configuration file and reboot the
switch for the values to be restored and checked for
consistency.
info Displays OSPF characteristics for the interface.
metric <metric> Configures the OSPF metric for the interface. The
switch advertises the metric in router link
advertisements.
metric is the range 0–65535.
poll-interval <seconds> Configures the polling interval for the OSPF interface
in seconds.
seconds is 0–2147483647.
priority <priority> Configures the OSPF priority for the interface during
the election process for the designated router. The
interface with the highest priority number is the
designated router. The interface with the second-
highest priority becomes the backup designated
router. If the priority is 0, the interface cannot become
either the designated router or a backup. The priority
is used only during election of the designated router
and backup designated router.
priority is in the range 0–255. The default is 1.
retransmit-interval <seconds> Configures the retransmit interval for the OSPF
interface; the number of seconds between link-state
advertisement retransmissions.
seconds is an integer 1–1800.
transit-delay <seconds> Configures the transit delay time for the OSPF
interface, the estimated time in seconds required to
transmit a link-state update packet over the interface.
seconds is an integer 1–1,800.
tunnel-id Specifies the ID number of the tunnel in the range of
1–2147477248.
Configuring OSPF on a tunnel
Configuration — IPv6 Routing November 2010 279