Avaya ERS 8600 series, Configuration Manual

Page: 338 / 420

Variable Value
- tcp-dstport-begin
- tcp-flags-end
- udp-begin
- udp-srcport-begin
- udp-dstport-begin
- ether-end
- ip-hdr-end
- icmp-msg-begin
- tcp-end
- udp-end
• offset: the number of bits from the base where the pattern
starts. This is a range from 0–76800.
• length: the length in bits of the user-defined field from 1–56.
name <pattern-name> Renames the pattern with a new name that you define. Each of
the three patterns must have a unique name.
word Specifies a name for the pattern in the range of 1–32 characters.
To set this option to the default value, use the default operator
with the command.
Applying the ACT
After you create and configure the ACT, apply it to implement the configuration.
Prerequisites
You must log on to the Privileged EXEC mode in the ACLI.
Procedure steps
Apply the ACT by using the following command:
IPv6 traffic filter configuration using the ACLI
338 Configuration — IPv6 Routing November 2010