Avaya ERS 8600 series, Configuration Manual

Page: 273 / 420

Procedure steps
1. In the navigation tree, open the following folders: Configuration, IPv6 .
2. Double-click Tunnel .
3. Select the tunnel to delete.
4. Click
Delete .
Modifying tunnel hop limits
Modify tunnel hop limits to update hop limit values on previously configured tunnels.
Procedure steps
1. In the navigation tree, open the following folders: Configuration, IPv6 .
2. Double-click Tunnel .
3. Click the Tunnel Interface tab.
4. In the row for the tunnel to configure, double-click the HopLimit column to modify
the displayed information as required.
5. Click Apply .
Variable definitions
Use the data in the following table to use the Tunnel Interface tab.
Variable Value
Index Identifies the tunnel interface internally. The value is derived
from the tunnel ID.
EncapsMethod Displays the tunnel mode: IPv6 for manually configured tunnels
and 6to4 for automatically configured tunnels.
HopLimit Configures the maximum number of hops in the tunnel.
The default value is 255.
Security Indicates the type of security on the tunnel interface.
TOS Displays the method used to configure the high 6 bits (the
differentiated services codepoint) of the IPv4 type of service
(TOS) or IPv6 traffic class in the outer IP header. A value of -1
indicates that the bits are copied from the payload header. A
value of -2 indicates that a traffic conditioner is invoked and
more information can be available in a traffic conditioner MIB
module. A value from 0 to 63 indicates that the bit field is
configured to the indicated value.
Modifying tunnel hop limits
Configuration — IPv6 Routing November 2010 273