Avaya ERS 8600 series, Configuration Manual

Page: 297 / 420

config vlan
<vid>
ipv6 mld
Variable definitions
Use the data in the following table to use the
config vlan ipv6 mld
command.
Variable Value
info Displays the current VLAN MLD configuration setting.
last-memb-query-int <seconds> Configures the query interval time in 1/10 of a second
for the last member.
seconds is in the range 0–65535.
query-interval <seconds> Configures the query interval time in 1/10 of a second.
seconds is in the range 0–65535.
query-maxresp <1seconds> The maximum query response time advertised in MLD
queries on this interface.
seconds is in the range 0–65535.
robustval <integer> Configures the robustness value.
integer is in the range 0–65535.
version <1|2> Configures the version of MLD to version 1 or version
2.
<vid> Specifies a VLAN ID in the range of 1–4094.
Enabling multicasting on a brouter port
Configure multicasting on a brouter port to enable MLD on the port.
Procedure steps
Enable multicasting by using the following command:
config ethernet <ports> ipv6 mcast <enable|disable>
Variable definitions
Use the data in the following table to use the
config ethernet ipv6 mcast
command.
Enabling multicasting on a brouter port
Configuration — IPv6 Routing November 2010 297