Automationdirect.com Stellar SR44, User Manual

Page: 99 / 238

5–25
5.4.2 – ‘Applications’ Menu (continued)
‘Applications’ Menu User configurable settings:
(These ‘Applications’ auto-features preset the SR44 for the selected application.)
Default (keypad)
Range: n/a Default: n/a
The ‘Default (keypad)’ setting provides a way to RESTORE all DEFAULT VALUES to the starter.
It also sets the starter for starting and stopping from the local or remote KEYPAD.
Provides a way of loading the default parameter values with ‘Keypad Starting’ as the choice for the
starting option (see Appendix A.1.4).
Default Auto
Range: n/a Default: n/a
The ‘Default Auto’ setting provides a way to RESTORE all DEFAULT VALUES to the starter.
It also sets the starter for starting and stopping from the Auto Features menu
Loads default parameter values and additionally turns on a number of features from the Auto
Features menu. Further details can be found in section 5.4.7 and Appendix B “Applications Data”.
Small Pump
Setting for Small Pump (
울
60 hp) application. (See “Appendix B: Applications Data” for details.)
Large Pump
Setting for Large Pump (
욷
75 hp) application. (See “Appendix B: Applications Data” for details.)
Conveyor
Setting for Conveyor application. (See “Appendix B: Applications Data” for details.)
Low Inertia Fan
Setting for Low Inertia Fan application. (See “Appendix B: Applications Data” for details.)
Hi Inertia Fan
Setting for High Inertia Fan application. (See “Appendix B: Applications Data” for details.)
Recip Compressor
Setting for Reciprocal Compressor application. (See “Appendix B: Applications Data” for details.)
Screw Compressor
Setting for Screw Compressor application. (See “Appendix B: Applications Data” for details.)
Rotry Compressor
Setting for Rotary Compressor application. (See “Appendix B: Applications Data” for details.)
* * *
* * *
–
–
–
–
–
–
–
–
Chapter 5: Keypad Menu Items and Parameters
SR44 Series Soft Starter User Manual
1st Ed, Rev B 07/31/2019