Automationdirect.com Stellar SR44, User Manual

Page: 212 / 238

Appendix A: Setup Examples
A.1.13 – Using the K2 Relay to Mimic Programmable Input 1 (continued)
(continued from previous page)
7. With ‘8 Parameter’ showing, press the
쑿
button until ‘10 Parameter’ is displayed.
8. Press ENTER to apply the change.
9. Press # once to return to ‘Map From’.
10. With ‘Map From’ on the top line of the display, press
쑼
button until ‘Bit Number’ is
displayed.
11. Press ENTER to select ‘Bit Number’.
12. Press the ‘Optimise’ button three times so the cursor is displayed on bit 3.
13. Press the
쑼
button to change the bit state to zero (0).
14. Press the ‘Optimise’ button once so the cursor is displayed on bit 4.
15. Press the
쑿
button once to change the bit state to one (1).
16. Press ENTER once to accept the change.
17. Press # four times to return to ‘Stopped and Ready’.
10
9
11 12 13 14
15
16
7
#
8
#
17
(continued from
previous page)
(press button multiple times, or hold to scroll)
To keep the above settings, they must be permanently saved. See section A.1.5
SR44 Series Soft Starter User Manual
1st Ed, Rev B 07/31/2019
A–18