Automationdirect.com Stellar SR44, User Manual

Page: 209 / 238

A–15
A.1.12 – Setting the Low Amps Level and
Using the K2 Relay to Display the Status of Low Current Bit (continued)
(continued from previous page)
7. With ‘Low Amps Level’ showing on the top line, press the
쑿
or
쑼
buttons until the required
level is set.
8. Press ENTER to confirm the change. The display will flash to confirm that the change has been
made.
9. Press the # button twice to return to the ‘Advanced’ menu.
10. With ‘Advanced’ on the top line of the display, press the
쑼
button until ‘Outputs’ is displayed
on the top line.
11. Press the ENTER button to select ‘Outputs’.
12. Press the
쑼
button until ‘K2’ is shown on the top line of the display.
13. Press the ENTER button to select ‘K2’.
14. With ‘Map From’ on the top line of the display, press ENTER.
15. With ‘8 Parameter’ showing, press the
쑿
button until ‘112 Parameter’ is displayed.
16. Press the ENTER button to confirm the change, and the display will flash once.
17. Press the # button once to return to ‘Map From’.
(continued next page)
23
10
9
11
13
14
15
16
7
#
8
#
23
12
# #
#
17
23
(continued next page)
(continued from previous page)
(press button multiple times, or hold to scroll)
(press button multiple times, or hold to scroll)
(scroll)
K2
K1
K2
Appendix A: Setup Examples
SR44 Series Soft Starter User Manual
1st Ed, Rev B 07/31/2019