Automationdirect.com Stellar SR44, User Manual

Page: 204 / 238

Appendix A: Setup Examples
A.1.8 – Viewing Basic Operating Parameter Values via the Settings Menu Option
1. With ‘Stopped and Ready’ shown on the display, press the ENTER button.
2. With ‘Applications’ shown on the top line of the display, press the ENTER button again.
3. With ‘Settings’ on the top line of the display, press the ENTER button and a downwards
pointing arrow will appear on the right hand-side of the top line. While this icon is displayed,
the bottom line of the display will show a brief list of some of the basic parameters and their
current values, including: the firmware version numbers; the starting option (‘Remote’ or
‘Keypad’); the current protection mode; the selected application (if none, the lower line of the
display will remain blank for a moment); and whether any derating has been applied to the unit
(if none, the lower line of the display will remain blank for a moment). When the arrow icon
has disappeared, the report showing the basic parameters has finished and the user is the back
in Menu Navigation mode, (see section 5.4.2).
4. This menu item is read-only.
5. Press the # button twice to return to ‘Stopped and ready’.
Enter
#
Enter
1 2 3
#
5
Since this menu item is read-only, it cannot be saved.
SR44 Series Soft Starter User Manual
1st Ed, Rev B 07/31/2019
A–10