Automationdirect.com Stellar SR44, User Manual

Page: 132 / 238

Chapter 5: Keypad Menu Items and Parameters
5.4.11 – ‘Parameters’ Menu (continued)
User Flags 1
Range: 0 to 255 (flags) Default: 142 Scaling: 1 Type: R/W
‘User Flags 1’ is a set of individual bits for user control or system status.
(Other ‘User Flags’ are parameters 52, 53, 95, 96, & 121. P95 is a direct 2nd set for P51.)
• Bit #:
0: Kickstart – selects Kickstart (except in 3MC mode).
1: Current Limit Timeout Selected – selects Trip or Continue on Current Limit Timeout.
«•» This parameter bit is not available in Bypass Operation unless a user-supplied external current
transformer is installed. (Refer to P18/B2, ‘Auto Bypass’.)
2: Overload Selected – selects Overload operation
«•» This parameter bit is not available in Bypass Operation unless a user-supplied external current
transformer is installed. (Refer to P18/B2, ‘Auto Bypass’.)
3: Shearpin Selected – selects Shearpin operation.
«•» This parameter bit is not available in Bypass Operation unless a user-supplied external current
transformer is installed. (Refer to P18/B2, ‘Auto Bypass’.)
4: Under Current Selected – selects Under Current operation.
«•» This parameter bit is not available in Bypass Operation unless a user-supplied external current
transformer is installed. (Refer to P18/B2, ‘Auto Bypass’.)
5: Thermistor Selected – not available.
6: (unused)
7: Terminal Starting – Start/Stop through onboard terminals
User Flags 2
Range: 0 to 255 (flags) Default: 0 Scaling: 1 Type: R/W
‘User Flags 2’ is a second set of individual bits for user control or system status.
(Other ‘User Flags’ are parameters 51, 53, 95, 96, & 121. P96 is a direct 2nd set for P52.)
• Bit #:
0: Low Voltage Soft-Stop –
1: Not Global Enable 1 – bits 1 & 2 must both be Off (0) to enable the starter
2: Not Global Enable 2 – bits 1 & 2 must both be Off (0) to enable the starter
3: Pod Start/Stop
4: Board Start/Stop
5: Main Contactor
6: Second Parameter Set
7: Zero Start Time
P-51
P-52
SR44 Series Soft Starter User Manual
1st Ed, Rev B 07/31/2019
5–58