Automationdirect.com Stellar SR44, User Manual

Page: 98 / 238

Chapter 5: Keypad Menu Items and Parameters
5.4.2 – ‘Applications’ Menu
This menu contains a list of typical applications for which a set of parameters have been
predefined by the manufacturer. This feature provides a quick and easy way of setting up the unit.
There are three exceptions to this list:
1) The first menu item, ‘Settings’, provides a brief report on the basic settings of the unit (see below
and Appendix A.1.6).
2) The second menu item, ‘Default (keypad)’, provides a way of loading the default parameter
values with ‘Keypad Starting’ as the choice for the starting option (see Appendix A.1.4).
3) The third menu item, ‘Default Auto’, loads default parameter values and additionally turns on a
number of features from the Auto Features menu. Further details can be found in the “SR44
Applications Data” and “SR44 Bit Parameters” sections of the “Electromagnetic Compatibility”
chapter (4).
‘Applications’ Menu Read Only Settings
Settings
Range: n/a Default: n/a
Displays information relevant to the SR44’s current state:
• ‘V1.069LM 10/12/16’
This message shows the keypad firmware version number and release date
(date displayed in European format; YY/MM/DD).
• ‘5MC V56.11’
This message gives the version number of the firmware in the SR44 control board.
• ‘Menu V1.023’
This message gives the version number of the navigating menu.
• ‘Remote/Keypad Starting’
This message indicates whether the Starting Parameter has been set to keypad or remote starting.
• ‘Full/Full&Opt/Start&Bypass/Phase Loss Only’
This message shows what protection mode has been set in the Protection Parameter.
• ‘Small Pump’
This next message will show what (if any) application has been set from the Application menu (Small
Pump is shown as an example). If no application has been set, then the display will appear blank for
a couple of seconds.
• ‘Temp/Alt Derated’
This message will be displayed if the unit has been derated for temperature or altitude. If no
deratinghas been set, then the display will appear blank for a couple of seconds.
–
SR44 Series Soft Starter User Manual
1st Ed, Rev B 07/31/2019
5–24