Automationdirect.com Stellar SR44, User Manual

Page: 203 / 238

A–9
A.1.7 – Loading the Default Parameter Values with ‘Remote Starting’ Option
1. With ‘Starter Disabled’ shown on the display, press the ENTER button.
2. With ‘Applications’ shown on the top line of the display, press the
쑼
button until ‘Permanent
Store’ is on the top line of the display.
3. Press the ENTER button.
4. Press the
쑼
button until ‘Default Param’ is shown on the top line of the display.
5. Press the ENTER button, and the display will flash indicating that default parameters have been
loaded. The display will then show the selected starting option (‘Remote’), and the selected
protection option (‘Full + Optimise’) before returning ‘Default Param’ to the top line of the
display.
6. Press the # button twice to return to ‘Starter Disabled’.
Enter
#
Enter
#
1
2
3
4
5
6
6
Storing
(press button multiple times, or hold to scroll)
(press button multiple times, or hold to scroll)
There is no need to save the parameters, as they have automatically been saved when the system was
reset to default values.
This example assumes that the unit has been disabled (see section A.1.2).
Appendix A: Setup Examples
SR44 Series Soft Starter User Manual
1st Ed, Rev B 07/31/2019