Automationdirect.com Stellar SR44, User Manual

Page: 104 / 238

Chapter 5: Keypad Menu Items and Parameters
5.4.4 – ‘Basic’ Menu
The Basic menu holds the parameters which control the primary functions of the unit. Changing
the values of these parameters will vary the starting and stopping duties, the trip protection set for
the unit, and the source of the start signal (Keypad or Remote).
‘Basic’ Menu Explanation Diagram
‘Basic’ Menu Settings
Disable Starter?
Range: P52 / B1&B2 Default: Off Scaling: n/a Type: R/W
‘Disable Starter?’ disables the starter by setting P52/B1&B2 = 1. While the unit is disabled it will
not comply with a start signal. Disabling the starter also allows the user to change certain
parameters which cannot be changed while the unit is enabled (such as Password and Station #).
Enable Starter?
Range: P52 / B1&B2 Default: On Scaling: n/a Type: R/W
‘Enable Starter ?’ enables the starter by setting P52/B1&B2 = 0. While the unit is enabled it will
comply with a start signal. Some parameters cannot be changed while the unit is enabled.
(P52.B1&2)
(P52.B1&2)
Notes;
1. This is the Start Pedestal voltage (P 11).
2. This is the Stop Pedestal voltage (P 16).
3. This is the supply voltage minus the voltage
that is dropped across the SR44.
I
LOAD
Time
V
LOAD
Time
V
MAX
3
V
START
1
V
STOP
2
Stop Time
(P17)
Current
Limit Level
(P30)
Start Time
(P12)
SR44 Series Soft Starter User Manual
1st Ed, Rev B 07/31/2019
5–30