Automationdirect.com Stellar SR44, User Manual

Page: 139 / 238

5–65
5.4.11 – ‘Parameters’ Menu (continued)
Kick Time 2
Range: 10 to 40 cycles Default: 25 cycles Scaling: 1 Type: R/W
‘Kick Time 2’ – Use with 2nd parameter set.
‘Kick Time 2’ sets the number of cycles for which Kick Ped 2 (P81) is applied, if selected (P95/B0).
(P-14 ‘Kick Time’ is the 1st parameter set counterpart of P-82 ‘Kick Time 2’.)
Dwell Time 2
Range: 1 to 255 seconds Default: 5s Scaling: 1 Type: R/W
‘Dwell Time 2’ – Use with 2nd parameter set.
‘Dwell Time 2’ provides a period of time following soft-start allowing the load to settle, and to
ensure that it is up to speed, before optimizing commences (if selected).
(P-15 ‘Dwell Time’ is the 1st parameter set counterpart of P-83 ‘Dwell Time 2’.)
Stop ped 2
Range: 10 to 60 percent Default: 10% Scaling: 1 Type: R/W
‘Soft Stop Pedestal 2’ – Use with 2nd parameter set.
‘Soft Stop Pedestal 2’ sets the percentage of supply voltage at which the Soft Stop will cease.
The actual value is affected by certain load variations.
(P-16 ‘Soft Stop Pedestal’ is the 1st parameter set counterpart of P-84 ‘Soft Stop Pedestal 2’.)
Stop Time 2
Range: 0 to 255 seconds Default: 0s Scaling: 1 Type: R/W
‘Soft Stop Time 2’ – Use with 2nd parameter set.
‘Soft Stop Time 2’ sets the time period over which the Soft Stop Ramp is performed.
(P-17 ‘Soft Stop Time’ is the 1st parameter set counterpart of P-85 ‘Soft Stop Time 2’.)
P-82
P-83
P-84
P-85
Chapter 5: Keypad Menu Items and Parameters
SR44 Series Soft Starter User Manual
1st Ed, Rev B 07/31/2019