Automationdirect.com Stellar SR44, User Manual

Page: 211 / 238

A–17
A.1.13 – Using the K2 Relay to Mimic Programmable Input 1
This example shows the user how to energize a relay via the start signal.
1. With ‘Stopped and Ready’ shown on the display, press the ENTER button.
2. With ‘Applications’ shown on the top line of the display, press the
쑼
button until ‘Outputs’ is
shown at the top of the display.
3. Press ENTER to select the ‘Outputs’ menu.
4. With ‘K1’ on the top line of the display, press the
쑼
button until ‘K2’ is shown at the top of the
display.
5. Press the ENTER button to select ‘K2’.
6. With ‘Map From’ on the top line of the display, press ENTER.
(continued next page)
Enter
#
Enter
#
1
2
3
4
5 6
# #
17
17
17
(continued next page)
(press button multiple times, or hold to scroll)
K2
K1
K2
Appendix A: Setup Examples
SR44 Series Soft Starter User Manual
1st Ed, Rev B 07/31/2019