AudioCodes Mediant 2000, User Manual

Page: 314 / 418

SIP User's Manual 314 Document #: LTRT-68808
Mediant 2000
4.4.12 Number Manipulation and Routing Parameters
The number manipulation and routing-related
ini
file configuration parameters are described
in the table below.
Table 4-12: Number Manipulation and Routing ini File Parameters
Parameter Description
TrunkGroup
This
ini
file table parameter defines the device's Trunks and
assigns them to Trunk Groups. The format of this parameter is
shown below:
[TrunkGroup]
FORMAT TrunkGroup_
Index
= TrunkGroup_
TrunkGroupNum
,
TrunkGroup_
FirstTrunkId
, TrunkGroup_
LastTrunkId
,
TrunkGroup_
FirstBChannel
, TrunkGroup_
LastBChannel
,
TrunkGroup_
FirstPhoneNumber
, TrunkGroup_
ProfileId
,
TrunkGroup_
Module
;
[\TrunkGroup]
For example:
[TrunkGroup]
TrunkGroup 1 = 0, 0, 0, 1, 31 ,401, 0; (E1 span)
TrunkGroup 1 = 0, 0, 0, 1, 31, $$, 1;
TrunkGroup 2 = 1, 2, 2, 1, 24, 3000;
(T1 span)
TrunkGroup 1 = 2, 0, 7, 1, 20, 1000; (8 E1 spans; 20 B-
channels)
TrunkGroup 1 = 0, 0, 3, *, 1000; (4 E1 spans; all B-channels)
[\TrunkGroup]
Notes:
ƒ
The parameter TrunkGroup_Module is not applicable.
ƒ
To represent all B-channels, use an asterisk (*).
ƒ
For configuring this table in the Web interface, refer to
Configuring the Trunk Group Table on page
195 .
ƒ
For a description of
ini
file table parameters, refer to
''Structure of ini File Table Parameters'' on page 257 .
DefaultNumber
For a description of this parameter, refer to ''DTMF & Dialing
Parameters'' on page
147 .
ChannelSelectMode
For a description of this parameter, refer to ''SIP General
Parameters'' on page
121 .
TrunkGroupSettings
This
ini
file table parameter defines rules for port allocation per
Trunk Group. If no rule exists, the global rule defined by the
parameter ChannelSelectMode takes effect. The format of this
parameter is as follows:
[TrunkGroupSettings]
FORMAT TrunkGroupSettings_
Index
=
TrunkGroupSettings_
TrunkGroupId
,
TrunkGroupSettings_
ChannelSelectMode
,
TrunkGroupSettings_
RegistrationMode
,
TrunkGroupSettings_
GatewayName
,TrunkGroupSettings_
Cont
actUser
, TrunkGroupSettings_
ServingIPGroup
;
[\TrunkGroupSettings]
For example: