AudioCodes Mediant 2000, User Manual

Page: 322 / 418

SIP User's Manual 322 Document #: LTRT-68808
Mediant 2000
Parameter Description
ƒ
1,1 = Public(ISDN/E.164), International
ƒ
1,2 = Public(ISDN/E.164), National
ƒ
1,3 = Public(ISDN/E.164), Network Specific
ƒ
1,4 = Public(ISDN/E.164), Subscriber
ƒ
1,6 = Public(ISDN/E.164), Abbreviated
For NI-2 and DMS-100 ISDN variants the valid combinations of TON and NPI for calling and called
numbers are (Plan/Type):
ƒ
0/0 - Unknown/Unknown
ƒ
1/1 - International number in ISDN/Telephony numbering plan
ƒ
1/2 - National number in ISDN/Telephony numbering plan
ƒ
1/4 - Subscriber (local) number in ISDN/Telephony numbering plan
ƒ
9/4 - Subscriber (local) number in Private numbering plan
SecureCallsFromIP
For a description of this parameter, refer to ''Advanced
Parameters'' on page
151 .
AltRouteCauseTel2IP
This
ini
file table parameter configures SIP call failure reason
values received from the IP side. If a call is released as a result
of one of these reasons, the device attempts to locate an
alternative route to the call in the 'Tel to IP Routing' table (if
Proxy is not used) or used as a redundant Proxy (when Proxy is
used).
The format of this parameter is as follows:
[AltRouteCauseTel2IP]
FORMAT AltRouteCauseTel2IP_
Index
=
AltRouteCauseTel2IP_
ReleaseCause
;
[\AltRouteCauseTel2IP]
For example:
[AltRouteCauseTel2IP]
AltRouteCauseTel2IP 0 = 486; (Busy Here)
AltRouteCauseTel2IP 1 = 480; (Temporarily Unavailable)
AltRouteCauseTel2IP 2 = 408; (No Response)
[\AltRouteCauseTel2IP]
Notes:
ƒ
The 408 reason can be used to specify no response from the
remote party to the INVITE request.
ƒ
This parameter can include up to 5 indices.
ƒ
For defining the Reasons for Alternative Routing table using
the Web interface, refer to ''Reasons for Alternative Routing''
on page
188 .
ƒ
For an explanation on using
ini
file table parameters, refer to
''Structure of ini File Table Parameters'' on page 257 .
AltRouteCauseIP2Tel
This
ini
file table parameter configures call failure reason values
received from the PSTN side (in Q.931 presentation). If a call is
released as a result of one of these reasons, the device attempts
to locate an alternative Trunk Group for the call in the 'IP to
Trunk Group Routing' table.
The format of this parameter is as follows:
[AltRouteCauseIP2Tel]
FORMAT AltRouteCauseIP2Tel_
Index
=