AudioCodes Mediant 2000, User Manual

Page: 151 / 418

Version 5.6 151 November 2008
SIP User's Manual 3. Web-Based Management
Parameter Description
Default Destination Number
[DefaultNumber]
Defines the default destination phone number used if the received
message doesn't contain a called party number and no phone number
is configured in the 'Trunk Group' table (refer to “Configuring the Trunk
Group Table” on page
195 ). The parameter is used as a starting
number for the list of channels comprising all trunk groups in the
device.
The default value is 1000.
Special Digit
Representation
[UseDigitForSpecialDTMF]
Defines the representation for ‘special’ digits (‘*’ and ‘#’) that are used
for out-of-band DTMF signaling (using SIP INFO/NOTIFY).
ƒ
[0]
Special = Uses the strings ‘*’ and ‘#’ (default).
ƒ
[1]
Numeric = Uses the numerical values 10 and 11.
3.4.7.2 Configuring the SIP Advanced Parameters
The
SIP Advanced Parameters
submenu allows you to configure advanced SIP control
protocol parameters. This submenu contains the following page items:
„
Advanced Parameters (refer to ''General Parameters'' on page 151 )
„ Supplementary Services (refer to ''Supplementary Services'' on page 159 )
„ Stand-Alone Survivability (refer to “Stand-Alone Survivability” on page 161 )
„ SBC Configuration (refer to “SBC Configuration” on page 163 )