AudioCodes Mediant 2000, User Manual

Page: 270 / 418

SIP User's Manual 270 Document #: LTRT-68808
Mediant 2000
Parameter Description
RAILoopTime
Time interval (in seconds) that the device periodically checks call
resource availability.
The valid range is 1 to 200. The default is 10.
Disconnect Supervision Parameters
TelConnectCode
For a description of this parameter, refer to ''Advanced Parameters''
on page
151 .
DisconnectOnBrokenCon
nection
For a description of this parameter, refer to ''Advanced Parameters''
on page
151 .
BrokenConnectionEventTi
meout
For a description of this parameter, refer to ''Advanced Parameters''
on page
151 .
EnableSilenceDisconnect
For a description of this parameter, refer to ''Advanced Parameters''
on page
151 .
FarEndDisconnectSilence
Period
For a description of this parameter, refer to ''Advanced Parameters''
on page
151 .
FarEndDisconnectSilence
Method
For a description of this parameter, refer to ''Advanced Parameters''
on page
151 .
FarEndDisconnectSilence
Threshold
Threshold of the packet count (in percentages) below which is
considered silence by the device.
The valid range is 1 to 100%. The default is 8%.
Note:
Applicable only if silence is detected according to packet count
(FarEndDisconnectSilenceMethod = 1).
Automatic Update Parameters
CmpFileURL
Specifies the name of the
cmp
file and the location of the server (IP
address or FQDN) from which the device loads a new
cmp
file and
updates itself. The
cmp
file can be loaded using HTTP, HTTPS, FTP,
FTPS, or NFS.
For example: http://192.168.0.1/filename
Notes:
ƒ
When this parameter is set in the
ini
file, the device always loads
the
cmp
file after it is reset.
ƒ
The
cmp
file is validated before it's burned to flash. The checksum
of the
cmp
file is also compared to the previously-burnt checksum
to avoid unnecessary resets.
ƒ
The maximum length of the URL address is 255 characters.
IniFileURL
Specifies the name of the
ini
file and the location of the server (IP
address or FQDN) from which the device loads the
ini
file. The
ini
file
can be loaded using: HTTP, HTTPS, FTP, FTPS or NFS.
For example:
http://192.168.0.1/filename
http://192.8.77.13/config<MAC>
https://<username>:<password>@<IP address>/<file name>
Notes:
ƒ
When using HTTP or HTTPS, the date and time of the
ini
file are
validated. Only more recently-dated
ini
files are loaded.
ƒ
The optional string '<MAC>' is replaced with the device's MAC
address. Therefore, the device requests an
ini
file name that
contains its MAC address. This option enables loading different
configurations for specific devices.