AudioCodes Mediant 2000, User Manual

Page: 194 / 418

SIP User's Manual 194 Document #: LTRT-68808
Mediant 2000
¾
To configure the IP Profile settings, take these 9 steps:
1.
Open the 'IP Profile Settings' page (
Configuration
tab >
Protocol Configuration
menu >
Profile Definitions
submenu >
IP Profile Settings
page item).
Figure 3-81: IP Profile Settings Page
2.
From the 'Profile ID' drop-down list, select an identification number for the IP Profile.
3.
In the 'Profile Name' field, enter an arbitrary name that allows you to easily identify the
IP Profile.
4.
From the 'Profile Preference' drop-down list, select the priority of the IP Profile, where
'1' is the lowest priority and '20' is the highest. If both IP and Tel profiles apply to the
same call, the coders and other common parameters (noted by an asterisk in the
description of the parameter IPProfile) of the preferred Profile are applied to that call. If
the Preference of the Tel and IP Profiles is identical, the Tel Profile parameters are
applied.
Note:
If the coder lists of both IP and Tel Profiles apply to the same call, only the
coders common to both are used. The order of the coders is determined by the
preference.