AudioCodes Mediant 2000, User Manual

Page: 405 / 418

Version 5.6 405 November 2008
SIP User's Manual 10. Tunneling Applications
TelProfile ProgressIndicator2IP;
TelProfile 1 = voice,$$,1,$$,$$,$$,$$,$$,$$,$$;
TelProfile 2 = data,$$,2,$$,$$,$$,$$,$$,$$,$$;
[\TelProfile]
Originating Side:
;E1 TRANSPARENT 31
ProtocolType_0 = 5
ProtocolType_1 = 5
ProtocolType_2 = 5
ProtocolType_3 = 5
;Channel selection by Phone number.
ChannelSelectMode = 0
[TrunkGroup]
FORMAT TrunkGroup_Index = TrunkGroup_TrunkGroupNum,
TrunkGroup_FirstTrunkId, TrunkGroup_LastTrunkId,
TrunkGroup_FirstBChannel, TrunkGroup_LastBChannel,
TrunkGroup_FirstPhoneNumber, TrunkGroup_ProfileId,
TrunkGroup_Module;
TrunkGroup 0 = 0,0,0,1,31,1000,1;
TrunkGroup 0 = 0,1,1,1,31,2000,1;
TrunkGroup 0 = 0,2,2,1,31,3000,1;
TrunkGroup 0 = 0,3,1,31,4000,1;
TrunkGroup 0 = 0,0,0,16,16,7000,2;
TrunkGroup 0 = 0,1,1,16,16,7001,2;
TrunkGroup 0 = 0,2,2,16,16,7002,2;
TrunkGroup 0 = 0,3,3,16,16,7003,2;
[\TrunkGroup]
[CoderName]
FORMAT CoderName_Index = CoderName_Type, CoderName_PacketInterval,
CoderName_rate, CoderName_PayloadType, CoderName_Sce;
CoderName 1 = 'g7231';
CoderName 2 = 'Transparent';
[\CoderName]
[TelProfile]
FORMAT TelProfile_Index = TelProfile_ProfileName,
TelProfile_TelPreference, TelProfile_CodersGroupID,
TelProfile_IsFaxUsed, TelProfile_JitterBufMinDelay,
TelProfile_JitterBufOptFactor, TelProfile_IPDiffServ,
TelProfile_SigIPDiffServ, TelProfile_DtmfVolume,
TelProfile_InputGain, TelProfile_VoiceVolume,
TelProfile_EnableReversePolarity,
TelProfile_EnableCurrentDisconnect,
TelProfile_EnableDigitDelivery, TelProfile_EnableEC,
TelProfile_MWIAnalog, TelProfile_MWIDisplay,
TelProfile_FlashHookPeriod, TelProfile_EnableEarlyMedia,
TelProfile_ProgressIndicator2IP;
TelProfile_1 = voice,$$,1,$$,$$,$$,$$,$$,$$,$$
TelProfile_2 = data,$$,2,$$,$$,$$,$$,$$,$$,$$
[\TelProfile]
10.2 QSIG Tunneling
The device supports QSIG tunneling over SIP according to IETF draft 'Tunnelling of QSIG
over SIP' (draft-elwell-sipping-qsig-tunnel-03) and the ECMA-355/ISO/IEC 22535 standard.
This method enables all QSIG messages to be sent as raw data in corresponding SIP
messages using a dedicated message body. This mechanism is useful for two QSIG
subscribers (connected to the same or different QSIG PBX) to communicate with each
other over an IP network. Tunneling is supported in both directions (Tel-to-IP and IP-to-Tel).