Version 5.6
299
November 2008
SIP User's Manual
4. ini File Configuration
Parameter
Description
two. Therefore, it is recommended not to select both coders
simultaneously.
For a list of supported coders, refer to ''Coders'' on page
To configure the 'Coders' table in the Web interface, refer to
''Coders'' on page
.
For a description of using
ini
file table parameters, refer to
''Structure of ini File Table Parameters'' on page
.
IPProfile
This
ini
file table parameter configures the IP profiles table. The
format of this parameter is as follows:
[IPProfile]
FORMAT IPProfile_Index = IPProfile_
ProfileName
,
IPProfile_
IpPreference
, IPProfile_
CodersGroupID
,
IPProfile_
IsFaxUsed
*, IPProfile_
JitterBufMinDelay
*,
IPProfile_
JitterBufOptFactor
*, IPProfile_
IPDiffServ
*,
IPProfile_
SigIPDiffServ
*, N/A, IPProfile_
RTPRedundancyDepth
,
IPProfile_
RemoteBaseUDPPort
, IPProfile_
CNGmode
,
IPProfile_
VxxTransportType
, IPProfile_
NSEMode
, N/A,
IPProfile_
PlayRBTone2IP
, IPProfile_
EnableEarlyMedia
*,
IPProfile_
ProgressIndicator2IP
*,
IPProfile_
EnableEchoCanceller
*,
IPProfile_CopyDest2RedirectNumber,
IPProfile_
MediaSecurityBehaviour
, IPProfile_
CallLimit
,
IPProfile_
DisconnectOnBrokenConnection
;
[\IPProfile]
For example:
[IPProfile]
IPProfile_1 =
name1,2,1,0,10,13,15,44,1,1,6000,0,2,0,0,0,1,0,1,0,0,-1,1;
IPProfile_2 =
name2,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$
$,$$,$$,40,$$;
[\IPProfile]
Notes:
This parameter can appear up to 9 times (i.e., indices 1-9).
* Indicates common parameters used in both IP and Tel
profiles.
IpPreference = determines the priority of the Profile (1 to 20,
where 20 is the highest preference). If both IP and Tel profiles
apply to the same call, the coders and other common
parameters (indicated with an asterisk) of the preferred Profile
are applied to that call. If the Tel and IP profiles are identical,
the Tel Profile parameters are applied.
Two adjacent dollar signs ('$$') indicate that the parameter's
default value is used.
IPProfile can be used in the 'Tel to IP Routing' (or 'Outbound IP
Routing Table' if EnableSBC is set to 1) and 'IP to Trunk Group
Routing' tables (Prefix and PSTNPrefix parameters).
The 'Profile Name' assigned to a Profile index, must enable
users to identify it intuitively and easily.
To configure the IP Profile table using the Web interface, refer
to ''IP Profile Settings'' on page
Summary of Contents for Mediant 2000
