Version 5.6
275
November 2008
SIP User's Manual
4. ini File Configuration
Parameter
Description
displayed.
For a description on using
ini
file table parameters, refer to
''Structure of ini File Table Parameters'' on page
DisableWebConfig
Determines whether the entire Web interface is in read-only mode.
[0]
= Enables modifications of parameters (default).
[1]
= Web interface in read-only mode.
When in read-only mode, parameters can't be modified. In addition,
the following pages can't be accessed: 'Web User Accounts',
'Certificates', 'Regional Settings', 'Maintenance Actions' and all file-
loading pages ('Load Auxiliary Files', 'Software Upgrade Wizard', and
'Configuration File').
Note:
To return to read/write after you have applied read-only using
this parameter (set to 1), you need to reboot your device with an
ini
file that doesn't include this parameter, using the BootP/TFTP Server
utility (refer to the
Product Reference Manual
).
HTTPport
HTTP port used for Web management (default is 80).
ScenarioFileName
Defines the file name of the Scenario file to be loaded to the device.
The file name must have the
dat
extension and can be up to 47
characters. For loading a Scenario using the Web interface, refer to
''Loading a Scenario to the Device'' on page
Telnet Parameters
TelnetServerEnable
For a description of this parameter, refer to ''Configuring the
Application Settings'' on page
.
TelnetServerPort
For a description of this parameter, refer to ''Configuring the
Application Settings'' on page
.
TelnetServerIdleDisconnect
For a description of this parameter, refer to ''Configuring the
Application Settings'' on page
.
SSHServerEnable
For a description of this parameter, refer to ''Configuring the
Application Settings'' on page
.
SSHServerPort
For a description of this parameter, refer to ''Configuring the
Application Settings'' on page
.
Customizing the Web Appearance Parameters
For detailed information on customizing the Web interface interface, refer to ''Customizing the Web
Interface'' on page
UseProductName
Determines whether the UserProductName text string is displayed
instead of the default product name.
[0]
= Disabled (default).
[1]
= Enables the display of the user-defined UserProductName
text string (in the Web interface interface and in the extracted
ini
file).
If enabled, the UserProductName text string is displayed instead of
the default product name.
UserProductName
Text string that replaces the default product name that appears in the
Web interface (upper right-hand corner) and the extracted
ini
file.
The default is 'Mediant 2000'.
The string can be up to 29 characters.
Summary of Contents for Mediant 2000
