manualshive.com logo in svg

AudioCodes Mediant 2000, User Manual

The AudioCodes Mediant 2000 is a versatile communication device, designed to enhance your business phone systems. With its comprehensive User Manual, easily downloadable for free at our manualshive.com, you can effortlessly navigate through its features, configurations, and troubleshooting information. Perfect for optimizing your communication network and boosting productivity.

Share
Download
background image

SIP User's Manual 

348 

Document #: LTRT-68808 

 Mediant 

2000 

 

7.3.2 

Configuring Emergency Calls 

The device's SAS agent can be configured to detect a user-defined, emergency number 
(e.g. 911 in North America), which it then redirects the call directly to the PSTN (through its 
E1/T1 trunk). The emergency number is configured using the 

ini 

file parameter 

SASEmergencyNumbers (for a detailed description, refer to ''SIP Configuration 
Parameters'' on page 

284

). 

Figure 

 

7-1: Device's SAS Agent Redirecting Emergency Calls to PSTN 

 

To configure support for emergency calls, configure the parameters below. The device and 
the SAS feature are configured independently. If the device and the SAS agent use 
different proxies, then the device's proxy server is defined using the 'Use Default Proxy' 
parameter, while the SAS proxy agent is defined using the 'Proxy Set' table and 
SASProxySet parameter. 

„

 

EnableSAS = 1  

„

 

SASLocalSIPUDPPort = (default 5080)  

„

 

IsProxyUsed = 1 

„

 

ProxyIP 0 = <external proxy IP address (device)> 

„

 

ProxyIP 1 = <external proxy IP address (SAS)> 

„

 

IsRegisterNeeded = 1 (for the device)  

„

 

IsFallbackUsed = 0  

„

 

SASRegistrationTime = <expiration time that SAS returns in the 200 OK to REGISTER 
in Emergency mode> (default 20) 

„

 

SASDefaultGatewayIP = < SAS gateway IP address> 

„

 

SASProxySet = 1 

 

Summary of Contents for Mediant 2000



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Mediant 2000

D-Link DG-102S Quick Start Manual preview
DG-102S
Brand: D-Link Pages: 8
D-Link DG-102S Quick Install Manual preview
DG-102S
Brand: D-Link Pages: 12
RAKwireless RAK7249 Configuration Manual preview
RAK7249
Brand: RAKwireless Pages: 47
RAKwireless RAK7249 Quick Start Manual preview
RAK7249
Brand: RAKwireless Pages: 6
Xtrend ET5000 User Manual preview
ET5000
Brand: Xtrend Pages: 68
Etross GoIP400 User Manual preview
GoIP400
Brand: Etross Pages: 50
Rath 2100-LTEVER4 Installation & Operation Manual preview
2100-LTEVER4
Brand: Rath Pages: 9
Monitor SiloTrack CLOUD Installation And Operation Manual preview
SiloTrack CLOUD
Brand: Monitor Pages: 10
ZyXEL Communications P-873HNU(B)-51B Quick Start Manual preview
P-873HNU(B)-51B
Brand: ZyXEL Communications Pages: 12
TANDBERG D13841.08 Administrator'S Manual preview
D13841.08
Brand: TANDBERG Pages: 54
Fujitsu GW1500 Getting Started Manual preview
GW1500
Brand: Fujitsu Pages: 46
Fujitsu BACnet UTY-VBGX Instruction Manual preview
BACnet UTY-VBGX
Brand: Fujitsu Pages: 103
Fujitsu UTY-VBGX Instruction Manual preview
UTY-VBGX
Brand: Fujitsu Pages: 159
Mercury NMEA 2000 Assembly preview
NMEA 2000
Brand: Mercury Pages: 5
Arrive AirPoint 2011-BYMG Installation Manuals preview
AirPoint 2011-BYMG
Brand: Arrive Pages: 2
Planet WPG-120 User Manual preview
WPG-120
Brand: Planet Pages: 30
Busch-Jaeger Busch-free@home DG-M-1.16.11 Product Manual preview
Busch-free@home DG-M-1.16.11
Brand: Busch-Jaeger Pages: 35
Watchguard Firebox X1250E Hardware Manual preview
Firebox X1250E
Brand: Watchguard Pages: 32

Brands by name

Popular brands

Load more brands